Does the vision system save any data?

Does the vision system save any data?

Our TM50 Vision Inspection System does, as standard, save all NG (Not Good) images to the cameras internal memory.
These images can be accessed via the Sensor Image History, found in the Sensor Setup Menu on the Monitor.

Under Logging Settings, it is possible to define either ALL images (good and NG) or just NG.

There is a limit to the number of images that can be saved on the cameras internal memory, the last 100 images for colour cameras and 300 for monochrome cameras.
    • Related Articles

    • How can i save vision system images?

      TM50 Vision Inspection Images can be saved either: To USB memory stick, attached to the USB port on the monitor. Via FTP. NOTE: FTP server configuration is required. Contact us for further information.
    • 3800MK2 No Downward Vision Image

      The 3800MK2 uses an upward and downward vision camera system for aligning devices. If you find that you have no downward camera Image then check the following points. Do you have Power and Activity LEDs on the downward camera? If Yes then we know ...
    • Slow Pocket Advance After Inspection - TM50

      This is an advisory note, for any TM50 owners that have vision system attached to the system that are experiencing slow throughput when inspecting. The information provided is generic, as various vision systems can be utilised, so please consult the ...
    • No communication with Cyberoptics system

      Summary Handler cannot initialize because of lost communication with Cyberoptics system DetailsNot to be confused with Cyber Status 5 (no communication between the SCM board and the Camera) Typical log file snippet: 2010-10-18 13:23:18 -0800  Cyber ...
    • GDPR - Adaptsys Support Centre Policy.

      The GDPR is here. The European Union has taken a monumental step in protecting the fundamental right to privacy for every EU resident with the General Data Protection Regulation (GDPR) which came into effective May 25, 2018. Simply put, EU residents ...