Related Articles
X800 Valid Site Configurations
On 8th Generation programming sites, upto 4 sockets cards can be place per programming site. With automated handlers, we employ stepper motors to pull down pressure plates to open and close the sockets and each device algo had code to establish to ...
X Axis Timeout Error on 4000 Series Windows Autohandler
The X-axis is the long, left/right axis. Also called the upper axis. (Note: For old DOS systems, this would be the "Y" axis) The time-out error message is received because the X motor drive system did not get to the encoder position within a certain ...
X Axis Timeout Error on 4000 Series Windows Autohandler
The X-axis is the long, left/right axis. Also called the upper axis. (Note: For old DOS systems, this would be the "Y" axis) The time-out error message is received because the X motor drive system did not get to the encoder position within a certain ...
BPM Microsystems Programming Site and T-post Compatibility
There are a variety of different programming sites available on BPM Microsystems handlers, each have different stepper motors, T-posts and power supplies. This guide serves as a way to help identify the site technology that you have and the ...
Reducing upload and broadcast times for ultra large data files on USB site Autohandlers.
Having received complaints about the lengthy upload time and broadcast time for large data files, BPM have discovered that the ports that the site USB cables are connected to can makes a big difference in process speed. Refer to the attachment for ...